• Ideal tool for cutting abrasive materials
• Tooth tips made of particularly wear-resistant carbide

• For mineral building materials
• For graphite
• For sanded grey cast iron

Item group 540
TCT (approx. 1600 HV)

Tooth shapes: S = raker tooth, K = hook tooth

• Set carbide-tipped band saw blade
• Bevelled, straight leading tooth
• Special division of the cutting channel
• Carbide with high wear resistance and toughness

• For treating steels and non-ferrous metals
• For universal use on all band sawing machines

Item group 541
DUROSET (approx. 1600 HV)

Item group 541
DUROSET NE (approx. 1600 HV) with extra wide set for treating non-ferrous metals

Tooth shape: K = hook tooth

• Economic alternative to start using carbide

• For aluminium and other materials that tend to form built-up edges
• For cross-sections up to 600 mm
• For materials up to a hardness of 60 HRC

Item group 542
ECODUR (approx. 1600 HV)

Tooth shape: T = trapezoid tooth
* Tooth pitch will be discontinued

• Extreme running smoothness even with high cutting speeds / cutting rates
• With patented special grinding of the tooth edges, we were able to achieve a more favourable division of the cutting channel into 7 chip sections

• For increasing the cutting rate
• For zirconium and molybdenum
• For hardened steels up to max. 62 HRC
• For aluminium bronze and Ampco
• For titanium alloys

Item group 545
FUTURA (approx. 1600 HV)

Tooth shape: T = trapezoid tooth

• Unique combination due to its sophisticated geometry:
  coarse cutting in the centre of the cutting channel as well as plain machining on both cutting surfaces
• Best surface finish

• For the best surface finish
• For sanded aluminium and magnesium cast

Item group 546
FUTURA PLUS (approx. 1600 HV)

Tooth shape: T = trapezoid tooth

• The tooth shape TSN, already tested and steadily improved over many years, is based on the proven tooth edge geometry of FUTURA. This gives incomparable stability to the precisely ground trapezoid teeth of FUTURA SN.
• FUTURA geometry with specially aligned rake angle

• For induction hardened and chrome coated shafts
• For hardened steel up to 62 HRC
• For hard manganese steel
• For hard-chrome plated work pieces
• For diameters up to 200 mm

Item group 547
FUTURA SN (approx. 1700 HV)

Tooth shape: TSN

• Top-quality product of the FUTURA line with special coating
• Clear increase of cutting rate and tool life for an even more economic cutting process.

• For structural steels
• For case hardened and quenched and tempered steels
• For hot and cold work steels

Item group 548
FUTURA PREMIUM (approx. 3800 HV)

Tooth shape T: trapezoid tooth

• Coated carbide-tipped blade with a tooth geometry especially developed for cutting rust- and acid-resistant steels.
• Offers short cutting times and high blade life.

• For rust- and acid-resistant steels
• For nickel-base alloys
• For titanium, titanium alloys

Item group 548
FUTURA PREMIUM (approx. 3800 HV)

Tooth shape T: trapezoid tooth

• Carbide tipped band saw blade
• Especially for cutting car tyres

• For car tyres

Item group 549
TCTYRE (approx. 1700 HV)

• Band saw blade with continuous carbide coating
• Especially for cutting work pieces of small dimensions

• For car tires
• For ceramic plates
• For cables and wires
• For fibreglass

Item group 550
TCgrit K (approx. 1500 HV)

Coating: K = continuously carbide coating, alternative dimensions on request

• Intermittent carbide coating
• Advantageous chip flow with work pieces of larger cross-sections

• For car tires
• For fibreglass
• For high surface finish with large cross-sections

Item group 554
TCgrit U (approx. 1500 HV)

Coating: U = intermittent carbide coating, alternative dimensions on request