|
|
|
| |
HOME|SAW BLADES & TOOLS | BIMETAL BAND
SAW BLADES |
|
BIMETAL BAND SAW BLADES
|
 |
|
 |
Features
- Ideal for cutting small and medium work pieces
- Vibration damping, variable tooth pitch
- Tooth tips made of particularly wear-resistant quality
Applications
- For small and medium work piece dimensions
- For profiles and solid materials
- For demanding shop operations
- For all steels up to 45 HRC
Item group 523
ECOFLEX M42 (68-69 HRC)
Item group 523
ECOFLEX M42 NE (68-69 HRC) with extra wide set for treating non-ferrous metals
Tooth shapes: S = raker tooth, K = hook tooth |
|
|
 |
Features
- Tooth geometry especially developed for cutting profiles and tubes
Applications
- For hollow profiles
- For angle profiles
- For beams
- For layer and bundle cuts
Item group 524
PROFLEX M42 (68-69 HRC)
Tooth shape: P = profile tooth
* Tooth pitch will be discontinued
** Also available in wider set for profiles with extreme residual stress |
|
|
 |
Features
- Optimal wear resistance due to high cobalt and molybdenum content of the tooth tips
- Resistant against highest dynamic strain
Applications
- For all steels up to 45 HRC
- For all work piece dimensions
- For non-ferrous metals
- For contour cuts
Item group 526
BIFLEX M42 (68-69 HRC)
Tooth shapes: S = raker tooth, K = hook tooth
|
|
|
 |
Features
- Particularly suitable for vibration-susceptible cutting tasks in serial cuts
- Variable tooth pitch
- Wear-resistant tooth tips
Applications
- For profile and bundle cuts
- For serial cuts
- For small and medium work piece dimensions
- For all steels up to 45 HRC
Item group 528
VARIO M42 (68-69 HRC)
Tooth shape: S = raker tooth |
|
|
 |
Features
- Tooth tips with high cobalt and molybdenum content
- Highest cutting rates
- Longer lifetime
Applications
- For layer and bundle cuts of large work piece dimensions
- For large profiles and solid materials
- For all steels up to 45 HRC
- For non-ferrous metals
Item group 529
MARATHON M42 (68-69 HRC)
Tooth shape: K = hook tooth
* Only available in special design PD.
** Dimension in light print will be discontinued. |
|
|
|
Features
- New special design: Dynamic tooth geometry with a groundbreaking set, which is especially matched on the demands for cutting thick-walled profiles.
- Designed for large quantities
- High performance and low kerf width
Applications
- For thick-walled profiles without residual stress
- For ingle and layer cut
- For steels up to 45 HRC
Item group 529
MARATHON M42 RS (68-69 HRC)
Tooth shape: K = hook tooth
* Only available in special design PD
** Dimension in light print will be discontinued |
|
|
 |
Features
- Even in interrupted cuts austenitic steels and exotic alloys can be cut
Applications
- For rust- and acid-resistant steels of medium and large bundle and profile dimensions
- For nickel base alloys (such as Inconel, Hastelloy, Nimonic) of medium and large bundle and profile dimensions
- For titanium and special bronze
- For steels up to 50 HRC
Item group 531
MARATHON M51 (approx. 69 HRC)
Tooth shape: K = hook tooth |
|
|
 |
Features
- Newly developed tooth shapes, especially for the following applications:
- Tooth shape HV: brittle, quenched and tempered materials
- Tooth shape VA: tough and long-chipping materials
- Clear cutting rate increase and optimal tool life with extremely large cross-sections
Applications
- For gigantic large work pieces
- For rust- and acid-resistant steels
- For steels with high tensile strength
- For nickel base alloys (such as Inconel, Hastelloy, Nimonic)
Item group 532
GIGANT M42 (68-69 HRC)
Tooth shape HV = annealed materials with high tensile strength
Tooth shape VA = stainless steels, tough and long-chipping materials |
|
|
 |
Features
- Newly developed tooth shapes especially for the following applications:
- Tooth shape HV: brittle, quenched and tempered materials
- Tooth shape VA: tough and long-chipping materials
- Clear cutting rate increase and optimal tool life with large cross-sections
Applications
- For large work pieces
- For rust- and acid-resistant steels
- For steels with high tensile strength
- For nickel base alloys (such as Inconel, Hastelloy, Nimonic)
Item group 534
VECTOR M42 (68-69 HRC)
Tooth shape HV = annealed materials with high tensile strength
Tooth shape VA = stainless steels, tough and long-chipping materials
|
|
|
 |
X3000
The new generation of WIKUS’ cutting edge materials even increases the blade life of our bimetal band saw blades GIGANT and VECTOR considerably. Practice tests demonstrated huge advantages when cutting materials that are difficult to cut, rust- and acid-resistant materials as well as nickel-base alloys.
Applications
- For gigantic large work pieces
- For rust- and acid-resistant steels
- For steels with high tensile strength
- For nickel base alloys (such as Inconel, Hastelloy, Nimonic)
Item group 633
GIGANT X3000 (approx. 69 HRC)
Tooth shape HV = annealed materials with high tensile strength
Tooth shape VA = stainless steels, tough and long-chipping materials
|
|
|
|
X3000
The new generation of WIKUS’ cutting edge materials even increases the blade life of our bimetal band saw blades GIGANT and VECTOR considerably. Practice tests demonstrated huge advantages when cutting materials that are difficult to cut, rust- and acid-resistant materials as well as nickel-base alloys.
Applications
- For large work pieces
- For rust- and acid-resistant steels
- For steels with high tensile strength
- For nickel base alloys (such as Inconel, Hastelloy, Nimonic)
Item group 633
VECTOR X3000 (approx. 69 HRC)
Tooth shape HV = annealed materials with high tensile strength
Tooth shape VA = stainless steels, tough and long-chipping materials
|
|
| |
|
|
|
