|
RP 45
Oil Base and Water Dispersing Rust Preventative
RP 45 is an oil base long term indoor rust preventative. RP 45 is a water dispersing rust preventative with acid scavenging capabilities and provides excellent rust protection on all ferrous metals especially cast iron. RP 45 was designed to be compatible with motor oil and is an excellent choice for machined internal engine parts. Use RP 45 straight for maximum life or RP 45 can be cut with mineral spirits to reduce protection and cost.
 Back to Top
|
|
RP 200
Solvent Based, Water Displacing Rust Preventative
RP 200 is a solvent based, water-displacing corrosion preventative formulated to provide excellent long-term indoor protection. The RP 200 deposits a long lasting, thin residual film, which can be easily removed using an alkaline cleaner or vapor degreaser. RP 200 will provide protection to ferrous and non-ferrous materials for up to 24 months indoor storage. RP 200 is designed to be used straight, but can be diluted with oil or solvent to produce a product, which will give shorter protection period a lower cost.
Back to Top
|
|
RP 206
Soluble Oil Long Term Rust Preventative
AFT, Inc. Advanced Fluid Technologies (517) 796-9737 ▼ Fax: (517) 796-9738 Rust Preventatives RP 45 RP 200 RP 206 RP 250 RP 310CM RP 520 RP 520MB RP 5250 RP 526P RP 527 RP 600CL RP 700 RP 45 Oil Base and Water Dispersing Rust Preventative RP 45 is an oil base long term indoor rust preventative. RP 45 is a water dispersing rust preventative with acid scavenging capabilities and provides excellent rust protection on all ferrous metals especially cast iron. RP 45 was designed to be compatible with motor oil and is an excellent choice for machined internal engine parts. Use RP 45 straight for maximum life or RP 45 can be cut with mineral spirits to reduce protection and cost. Back To Top RP 200 Solvent Based, Water Displacing Rust Preventative RP 200 is a solvent based, water-displacing corrosion preventative formulated to provide excellent long-term indoor protection. The RP 200 deposits a long lasting, thin residual film, which can be easily removed using an alkaline cleaner or vapor degreaser. RP 200 will provide protection to ferrous and non-ferrous materials for up to 24 months indoor storage. RP 200 is designed to be used straight, but can be diluted with oil or solvent to produce a product, which will give shorter protection period a lower cost. Back To Top RP 206 Soluble Oil Long Term Rust Preventative RP 206 is a water soluble rust inhibitor with long term rust protection capabilities. RP 206 will provide up to 6 months protection at a 10% solution. RP 206 will leave an oil film that can be easily removed with a mild alkaline or solvent cleaner.
Back to Top
|
|
RP 250
Solvent Based, Long Term Rust Preventative
RP 250 is a solvent based, water-displacing corrosion preventative formulated to provide excellent long term (2-years plus) indoor protection. The RP 250 deposits a long lasting, thin residual film, which can be easily removed using an alkaline cleaner or vapor degreaser. RP 250 is formulated to pass > 90 hour salt spray analysis and is ideal for overseas shipping. RP 250 is designed to be used straight, but can be diluted with oil or solvent to produce a product, which will give a shorter protection period at a lower cost.
Back to Top
|
|
RP 310CM
Cleaner & Rust Preventative
RP 310CM is a medium duty cleaner and rust preventative product. RP 310CM will clean coolants, chips, dirt and foreign material off ferrous metals. RP 310CM will leave a nitrated rust preventative with a typical protection of 30 days indoor storage at 10% dilution.
Back to Top
|
|
RP 520
RP 520 is a water-based synthetic rust preventative developed for superior indoor storage. RP 520 is a unique blend of materials that can replace solvent and standard oil-based corrosion preventatives. The RP 520 is designed for ferrous metals and will leave a clear "dry to the touch" coating in approximately 30 minutes at ambient temperatures. RP 520 can be tailored for length of protection time to reduce cost and save money.
Application procedure can be a dip, spray or flow-coat. Parts must be completely dry prior to packaging. If a hot water wash and blow off is used, parts must be at room temperature prior to enclosing package, as not to create a humidity cabinet resulting in rust preventative removal and rust potential.
Back to Top
|
|
RP 520MB
RP 520MB is a water-base synthetic rust preventative developed for severe climate conditions. RP 520MB is a unique blend of materials that can handle a change in environments going from high humidity to an air-conditioned room and vise versa. At specific concentrations the RP 520MB has withstand 2 hours in a salt cabinet before rust was present. Application procedure can be dip, spray or flow-coat. Parts must be dry and room temperature prior to packaging.
Back to Top
|
|
RP 5250
Synthetic Rust Preventative
RP 5250 is a water-base synthetic rust preventative developed for superior indoor storage. RP 5250 is a unique blend of materials and D.I. water that can replace solvent and standard oil-based corrosion preventatives. RP 5250 is designed for ferrous metals and will leave a clear “dry to the touch” coating in approximately 30 minutes at ambient temperatures. Take away your water quality issues or concerns by using RP 5250 straight for best results.
Application procedure can be dip, spray or flow-coat. Parts must be completely dry prior to packaging. If a hot water wash and blow off is used, parts must be at room temperature prior to enclosed packaging, as not to create a humidity cabinet resulting in rust preventative removal and rust potential.
Back to Top
|
|
RP 526P
RP 526P is a water-based synthetic rust preventative developed for superior indoor storage. RP 526P is a unique blend of materials that can replace solvent and standard oil-based corrosion preventatives. The RP 526P is designed for ferrous metals and will leave a clear "dry to the touch" coating in approximately 30 minutes at ambient temperatures. RP 526P can be tailored for length of protection time to reduce cost and save money. Application procedure can be a dip, spray or flow-coat. Parts must be completely dry prior to packaging. If a hot water wash and blow off is used, parts must be at room temperature prior to enclosing package, as not to create a humidity cabinet resulting in rust preventative removal and rust potential.
Back to Top
|
|
RP 527
RP 527 is a water-base synthetic rust preventative developed for leak testing tanks and has excellent indoor storage protection. RP 527 is a unique blend of materials that are clear and allow the operator to see leaks quicker in leak test equipment. The RP 527 is designed for ferrous metals and will not have an effect on plated parts. The RP 527 will leave a clear “dry to the touch” coating in approximately 30 minutes at ambient temperatures. Allow applicable time to dry prior to packaging. If a hot water wash and blow off is used, parts must be at room temperature prior to enclosed packaging, as not to create a humidity cabinet resulting in rust preventative removal and rust potential.
Back to Top
|
|
RP 600CL
Scale and Corrosion Inhibitor
Ideal for Closed Loop Re-circulating Systems RP 600CL is a closed loop scale and corrosion inhibitor. RP 600CL will provide excellent cooling properties with worry free scale and corrosion buildup. RP 600CL is safe on all metals and will not degrade cooling system. We recommend a complete system flush at 6 to 12 month intervals, depending on your current water quality.
Back to Top
|
|
RP 700
In Process RP or Water Jet De-burr Fluid
RP 700 can be used on ferrous and aluminum materials as an in-process RP or in a water jet de-burr process. RP 700 will not foam up to 6000 psi and provides 15 days of indoor storage protection at 10% dilution. RP 700 has excellent wetting properties that will leave a spot free part, using R.O. or D.I. water.
Back to Top
|
