|
Draw Lube 305CF
Heavy to Medium Duty Chlorine Free Soluble Oil Drawing and Stamping
Draw Lube 305CF is a heavy to medium duty chlorine free petroleum based water soluble drawing and stamping fluid. Draw Lube 305CF contains non-chlorinated extreme pressure additives to provide excellent anti-weld and die protection properties. Draw Lube 305CF is an excellent choice for replacing your chlorinated paraffin based draw lubes. Draw Lube 305CF forms a stable solution in all dilutions in water. Draw Lube 305CF provides excellent corrosion protection to parts and machine surfaces. A bactericide is incorporated to provide long sump life. Typical use dilutions are 6% to 50% in water. The outstanding physical characteristics of the Draw Lube 305CF coupled with the cost/performance function ratio justify looking at replacing your present drawing and stamping fluid.
 Back to Top
|
|
Draw Lube 795
Evaporative Stamping Lubricant
Draw Lube 795 is an evaporative forming lubricant. Draw Lube 795 may be used on copper, steel, and aluminum material. Draw Lube 795 is particularly designed for fin stamping and end sheet production in shops which do not clean their coils. Draw Lube 795 is compatible with most painting and brazing operations as well as being compatible with most refrigerants.
Back to Top
|
|
Draw Lube 800D
Semi-Synthetic Drawing and Stamping
Draw Lube 800D is a light to medium duty all metals drawing and stamping fluid. Draw Lube 800D can be used in ferrous and non-ferrous drawing applications. If used on stainless it is recommended in light to medium duty. Draw Lube 800D can be diluted with water with a range of dilution from 1:1 to 10:1 depending on the severity of the draw.
Draw Lube 800D is a non-chlorinated drawing and stamping lubricant. It has a pH range of 8.3 - 8.75 and provides short term rust protection 7-14 days
Back to Top
|
|
Draw Lube 890
Heavy to Medium Duty Soluble Oil Drawing and Stamping
Draw Lube 890 is an emulsion type, metal-forming lubricant developed for general purpose and heavy-duty applications. Draw Lube 890 provides superior bacterial resistance for long-term, trouble free performance. Draw Lube 890 has inherent stability and optimum performance characteristics that are maintained for the life of the fluid without the need for periodic additions of costly additives. Draw Lube 890 contains highly polar ingredients and EP (extreme pressure) additives that provide superior lubricity and boundary lubrication. In addition, the cleanliness of Draw Lube 890 prevents the formation of heavy, tacky water insoluble residues. The versatility of Draw Lube 890 makes it a deal for plants where intermittent service demands superior performance.
Back to Top
|
|
Oil Draw 129E
Heavy Duty Graphite Impregnated Drawing Fluid
Oil Draw 129E is a superior anti-wear extreme pressure, low friction drawing lube consisting of the finest particle size ("A"), high purity colloidal graphite fully stabilized in a medium grade petroleum oil. Oil Draw 129E is formulated for heavy duty applications in both steel and aluminum.
Oil Draw 129E can handle the most severe forming applications and save you money.
Back to Top
|
|
Oil Draw 935
Heavy Duty Smokeless and Odorless Forging Fluid
Oil Draw 935 is a superior spray forging die lubricant formulated to meet the needs of high temperatures and difficult operations on carbon alloys, stainless steel, and aluminum. Oil Draw 935 is smokeless and odorless (no ammonia smell), water-base colloidal graphite lubricant to be used in typical applications such as: hot forge steel, warm forming steel, automated systems and forging powder performs. Oil Draw 935 has excellent lube and die filling properties that will provide uniform wetting and a good part release. Oil Draw 935 can be sprayed on dies at temperatures up to and exceeding 600 degrees Fahrenheit. Final dilution ratio of the Oil Draw 935 must be determined by the individual application for increased cost savings. Oil Draw 935 will extend die life and provide fewer rejects with less product waste, saving you money.
Back to Top
|
|
Water Draw 1196 T1
Aluminum Extrusion/Forging Micro-Graphite In Water
Water Draw 1196 T1 is a dispersion of high quality micro-graphite in water specifically designed for high temperature applications in aluminum extrusion/forging. Special additives provide for superior wetting of hot surfaces while our unique graphite particle size distribution gives optimum coverage.
Back to Top
|
|
Water Draw 5001
Non-Graphite/Water Base Forging Lubricant
Water Draw 5001 is a specially formulated forging compound designed for press and hammer work. This product contains high temperature water soluble polymers which will enhance tool life, produce exceptionally clean forgings, will not cause build-up, and contains no pigments which can settle or clog spray nozzles. Water Draw 5001 has been formulated to function in temperature ranges which include warm and hot forgings. Water Draw 5001 exhibits exceptionally good release qualities; this totally soluble additive package is characteristic of Carbon under heat and extreme pressure conditions.
When this product is applied by spray, it will satisfactorily wet dies and punches ranging in temperature between 220EF and 750EF. For initial evaluation, dilute Water Draw 5001 with 5-7 parts water. Usually this dilution ratio can be extended to meet specific job requirements and further cost savings.
When properly diluted and applied, this product will give exceptionally clean release even when die design encourages 'stickers'
Back to Top
|
