Band Saw Blades | Bimetal Blades

Bimetal Band Saw Blades

Ecoflex M42
Features:   Applications:
- Ideal for cutting small and medium work pieces
- Vibration damping, variable tooth pitch
- Tooth tips made of particularly wear-resistant quality
 
- For small and medium work piece dimensions
- For profiles and solid materials
- For demanding shop operations
- For all steels up to 45 HRC


Item group 523
ECOFLEX M42 (68-69 HRC)

Item group 523
ECOFLEX M42 NE (68-69 HRC) with extra wide set for treating non-ferrous metals


Tooth shapes: S = raker tooth, K = hook tooth

Proflex M42
Features:   Applications:
- Tooth geometry especially developed for cutting profiles and tubes
 
- For hollow profiles
- For angle profiles
- For beams
- For layer and bundle cuts


Item group 524
PROFLEX M42 (68-69 HRC)

Tooth shape: P = profile tooth
* Tooth pitch will be discontinued
** Also available in wider set for profiles with extreme residual stress

Biflex M42
Features:   Applications:
- Optimal wear resistance due to high cobalt and molybdenum content of the tooth tips
- Resistant against highest dynamic strain
 
- For all steels up to 45 HRC
- For all work piece dimensions
- For non-ferrous metals
- For contour cuts


Item group 526
BIFLEX M42 (68-69 HRC)

Vario M42
Features:   Applications:
- Particularly suitable for vibration-susceptible cutting tasks in serial cuts
- Variable tooth pitch
- Wear-resistant tooth tips
 
- For profile and bundle cuts
- For serial cuts
- For small and medium work piece dimensions
- For all steels up to 45 HRC


Item group 528
VARIO M42 (68-69 HRC)

Tooth shape: S = raker tooth

Marathon M42
Features:   Applications:
- Tooth tips with high cobalt and molybdenum content
- Highest cutting rates
- Longer lifetime
 
- For layer and bundle cuts of large work piece dimensions
- For large profiles and solid materials
- For all steels up to 45 HRC
- For non-ferrous metals


Item group 529
MARATHON M42 (68-69 HRC)

Tooth shape: K = hook tooth
* Only available in special design PD
** Dimension in light print will be discontinued

Marathon M51
Features:   Applications:
- Even in interrupted cuts austenitic steels and exotic alloys can be cut
 
- For rust- and acid-resistant steels of medium and large bundle and profile dimensions
- For nickel base alloys (such as Inconel, Hastelloy, Nimonic) of medium and large bundle and profile dimensions
- For titanium and special bronze
- For steels up to 50 HRC


Item group 531
MARATHON M51 (approx. 69 HRC)

Tooth shape: K = hook tooth

Gigant M42/M51
Features:   Applications:
- New developed tooth shapes, especially for the following applications:
Tooth shape HV: brittle, quenched and tempered materials
Tooth shape VA: tough and long-chipping materials
- Clear cutting rate increase and optimal tool life with extreme large cross-sections
 
- For gigantic large work pieces
- For rust- and acid-resistant steels
- For steels with high tensile strength
- For nickel base alloys (such as Inconel, Hastelloy, Nimonic)


Item group 532 GIGANT M42 (68-69 HRC)
Item group 533 GIGANT M51 (approx. 69 HRC)

Tooth shape HV = annealed materials with high tensile strength
Tooth shape VA = stainless steels, tough and long-chipping materials
* Only available in M42

Vector M42/M51
Features:   Applications:
- New developed tooth shapes especially for the following applications:
Tooth shape HV: brittle, quenched and tempered materials
Tooth shape VA: tough and long-chipping materials
- Clear cutting rate increase and optimal tool life with large cross-sections
 
- For large work pieces
- For rust- and acid-resistant steels
- For steels with high tensile strength
- For nickel base alloys (such as Inconel, Hastelloy, Nimonic)


Item group 534 VECTOR M42 (68-69 HRC)
Item group 539 VECTOR M51 (approx. 69 HRC)

Tooth shape HV = annealed materials with high tensile strength
Tooth shape VA = stainless steels, tough and long-chipping materials
* Only available in M42

Selecta VT M51
Features:   Applications:
- High-performance band saw blade
- Extremely positive rake angle for optimal chip division
- Variable set sequence
 
- For long-chipping materials
- For rust- and acid-resistance steels
- For nickel base alloys
- For special bronze and copper
- For titanium alloys


Item group 536 SELEKTA VT M42 (68-69 HRC)
Item group 538 SELEKTA VT M51 (approx. 69 HRC)

Tooth shape: K = hook tooth
* Only available in M42
Specifications subject to change without notice. Not responsible for typographical errors.
Machines may be shown with optional equipment.