Circular Saws (Aluminum) | Mitering | Semi-Automatic | BOMAR AL 600


The BOMAR AL600  is a semi-automatic circular saw designed for cutting profiles and solids made of aluminum, aluminum alloys, copper and plastics.

The circular saw blade is located underneath the machine table and can be easily adjusted for miter cuts from 60° left to 90° right.

Two vertical clamping cylinders ensure fast and safe material clamping. One of them is equipped with a check valve, so even when air pressure is decreasing, the material will be fixed.

The control panel with all major functions is conveniently located in front of the machine, making operation easy and ergonomic.

FEATURES

  • 2 Vertical Clamping Cylinders (Additional Horizontal Vises are Optional)
  • Miter Cutting Range: -60° to 90°
  • Easy to Adjust Cutting Angles with Index Positions in 15° Increments
  • Angle Scale
  • Machine Door with Safety Switches
  • Integrated Spray Mist System
  • Rigid Cast Iron Machine Base
Technical Data
Saw Band Dimensions 600 mm x 4.6 mm x 30 mm
Saw Drive 7.5 hp
Blade Speed 1620 RPM
Dimensions (W × L × H) 40'' x 39'' x 46''
Weight 1400 lbs.
Voltage Various Voltages Available

Cutting Capacity
0º Jaws Ahead 0º Jaws Back 45º L/R 60º L/R
inch Ø 8.1 Ø 6.7 Ø 7.1 Ø 5.7
mm Ø 205 Ø 170 Ø 180 Ø 145
inch 12.2 x 2.0 19.7 x 2.0 8.5 x 2.0 6.1 x 2.0
mm 310 x 50 500 x 50 215 x 50 155 x 50
inch 4.3 x 8.3 4.9 x 17.9 2.0 x 8.9 1.6 x 8.9
mm 110 x 210 125 x 455 50 x 225 40 x 225
inch 6.9 x 6.9 4.9 x 4.9 6.1 x 6.1 4.9 x 4.9
mm 175 x 175 125 x 125 155 x 155 125 x 125
Specifications subject to change without notice. Not responsible for typographical errors.
Machines may be shown with optional equipment.