Circular Saws (Aluminum) | Mitering | Semi-Automatic | BOMAR AL 500


The BOMAR AL500 is a semi-automatic circular saw designed for cutting profiles and solids made of aluminum, aluminum alloys, copper and plastics.

The circular saw blade is located underneath the machine table and can be easily adjusted for miter cuts from 60° left to 90° right.

Two vertical clamping cylinders ensure fast and safe material clamping. One of them is equipped with a check valve, so even when air pressure is decreasing, the material will be fixed.

The control panel with all major functions is conveniently located in front of the machine, making operation easy and ergonomic.

FEATURES

  • 2 Vertical Clamping Cylinders
    (Additional Horizontal Vises are Optional)
  • Miter Cutting Range: -60° to 90°
  • Easy to Adjust Cutting Angles with Index Positions in 15° Increments
  • Angle Scale
  • Machine Door with Safety Switches
  • Integrated Spray Mist System
  • Rigid Cast Iron Machine Base
Technical Data
Saw Blade Dimensions 500 mm x 4 mm x 32 mm
Saw Drive 5.4 hp
Blade Speed 1950 RPM
Dimensions (W × L × H) 36'' x 37'' x 61''
Weight 1100 lbs.
Voltage Various Voltages Available

Cutting Capacity
0º Jaws Ahead 0º Jaws Back 45º L/R 60º L/R
inch Ø 6.7 Ø 5.3 Ø 5.9 Ø 4.7
mm Ø 170 Ø 135 Ø 150 Ø 120
inch 10.4 x 1.0 15.6 x 2.8 7.1 x 2.0 4.7 x 2.8
mm 265 x 25 395 x 70 180 x 50 120 x 70
inch 3.5 x 6.9 14.8 x 3.7 3.1 x 6.7 2.2 x 6.7
mm 90 x 175 375 x 95 80 x 170 55 x170
inch 5.9 x 5.9 3.7 x 3.7 5.1 x 5.1 4.1 x 4.1
mm 150 x 150 95 x 95 130 x 130 105 x 105
Specifications subject to change without notice. Not responsible for typographical errors.
Machines may be shown with optional equipment.